SICOMA MPC series planetary concrete mixer is best choice for brick industry. It has Italian 66 years’ professional technology. It adopts fixed gear box and planetary gearbox coordinately. It drives mixture mixing of both the rotation of the mixing blades and the revolution of the main shaft, which can make the mixing materials mix homogeneous and quick, each zone is covered. Studies show that, not only the uniformity of SICOMA planetary mixer is good in macroscopic, but also is easy to break up cement particles, which greatly increase the intensity of concrete and save the cement.
And it can be equipped with different types of discharging doors according to different kind of mixing materials. The discharging door adopts hydraulic and manual type. It can do multi-stay. The graphic design at the bottom of the cylinder can fully discharge the materials, which effectively solves the problem of materials residues.
1. Skip hopper device is optional to meet different needs from different customers.
2. The improvement of the materials of mixing scrapers and lining board, especially the alloyed mixing scrapers and lining boards, can greatly extend the maintenance cycle, reduce the cost, get remarkable comprehensive benefit.
3. Unique gearing system. The big gear internal and the overloading design of the gearbox can greatly extend the life of the mixer. At the same time, the flat box design can reduce overall height of the mixer, which benefits the layout planning of he mixing plant and save shipping cost for customer.
4. Its mixing arms can be equipped with revolving continuous microwave hygrostat, the datas are accurate, continuous through the real-time detection by humidity changes of mixing materials, which ensures the quality of mixing materials. It is very convenient for those industries that require high quality of the products.
|Motor Power (HP)||25||40||50||60||2×40||2×50|
|Hydraulic Motor Power (HP)||2||2||2||5.5||5.5||7.5|
|Rotating Speed of Planetary Reducer (Rpm/min)||21||20||21||15||15||14|
|Rotating Speeding of Planetary Wheel (Rpm/min)||44||41||44||43+43||30+30||31+31|
|Quantity of Long Mixing Arm for Revolution||1||1||1||1||1||1|
|Quantity of Short Mixing Arm for Revolution||1||1||1||1||1||1|
|Quantity of Short Mixing Arm||3||3||3||6||6||6|
|Quantity of Side Scraper for Revolution||4||4||4||4||4||8|
|Quantity of Bottom Scraper||3||3||3||3+3||3+3||3+3|
On April 9th, 2018, two sets of MPC750/500 sicoma concrete mixers, two sets of MAO2250/1500 Sicoma mixers, six sets of WAM screw conveyors and some WAM spare parts were delivered to Africa.
On February 10th, 2018, one set of MAO4500/3000 sicoma twin shaft concrete mixer, 3 sets of WAM screw conveyors and some butterfly valves, and three sets of siemens motors were delivered to Africa.
On February 5th, 2018, two sets of MP500 planetary concrete mixers were packed into a 20-foot cabinet in the factory and will be sent to North Africa.
On January 23th, 2018, Daswell send the MPS1500 planetary concrete mixer, four sets of high pressure cleaning nozzles and some parts to Western Europe.
On December 13th, 2017, two sets of MP330 planetary concrete mixers, two sets of MP500 concrete mixers, two sets of JS1000 mixer’s reducers and some concrete mixing plant’s spare parts, like WAM butterfly valve, vibration motor, filter core of dust collector, AirTAC cylinder, etc were loaded into a 40-foot high cabinets, then be sent to the port.
On November 22th, 2017, Daswell Machinery sent two sets of MP1500 planetary concrete mixers and them parts to the port. The two sets of concrete mixers and parts will be loaded into a 40-frame cabinet at the port, later will be shipped to Western Europe.
On November 7th, 2017, one set of JSE1250 twin shaft concrete mixer was loaded into containers smoothly and then will be sent to the port.
On September 14th, 2017, one set of Sicoma MAO4500/3000 twin shaft mixer and four sets of 273mm diameter, 8 meter long screw conveyors were loaded into containers in our factory and will be sent to Southeast Asia.
At 2017-06-02, Daswell sent 1 set of MP330 planetary concrete mixer and 1 set of JS500 mixer to South America.
On April 28th, 2017, we delivered one set of MSO1500/1000 SICOMA twin shaft concrete mixer to Southeast Asia. This SICOMA twin shaft mixer is made by SICOMA ZHUHAI with Italy highest technology. This twin shaft mixer can produce one cubic meter of concrete per batch.
On April 21, 2017, one DASWELL MP500 planetary concrete mixer and one DASWELL JSE1500 twin shaft concrete mixer were loaded into one 20 feet container. These two concrete mixers were ordered by our regular customer from West Europe. They are a dealer. And these two concrete mixers are for two different end users.
On April 10, 2017, one set of sicoma MP375 and MP750 planetary concrete mixers and a set of skip hopper hoisting system for sicoma MEO1500/1000 were delivered to southeast Asia.
On January 27, 2016, we delivered 4 sets of SICOMA MAO2250/1500 to Southeast Asia to be used for government project and as backup for concrete batching plant.
On December 26, 2016, we sent one DASWELL MP1000 planetary concrete mixer to our regular customer in West Europe. The mixer motor is disassembled in order that it can be loaded into a 40HQ container to reduce the sea freight cost.