Feed the materials by the vibrating feeder, it can control the feed amount automatically according to the actual load of grinding mill, and the particle size. The two crushing chambers in the grinding mill are placed in In-line. Each crushing chamber is equipped with two columns of rotor, the high wear-resistant liner with high hardness are equipped at the top of all the rotor, among them leaving the appropriate gap. The materials are formed into ultra-fine powder from several to tens of micron, which through impacting, grinding, cutting of high-speed rotors and collision & friction between particles after two-stage crushing. The gravel difficult to grind and impurities in materials , can be discharged outside of the machine through special slagging device automatically.
1. Large feeding particle size, high crushing efficiency, low energy consumption, small pollution;
2. The automatic slagging device equipped in the grinding mill can effectively improve product quality;
3. Negative pressure work, reducing the dust pollution to the environment, working conditions are good.
|Capacity (D90≤10μm )||410kg/h||820kg/h|
Note: The parameters in the table is calibrated with Talc, for the different materials, the productivity will be different, it is only for reference.
At 2017-12-25, one set of VGM28 Wet Grinding Mill for Calcium Carbonate with screw pump , and grinding beads sent to Egypt for laboratory use.