ArrowArrow
ArrowArrow
ArrowArrow
ArrowArrow
Slider

DASWELL truck mounted concrete pump truck uses modern advanced computer simulation technology to systematically analyze the effects of various parameters such as stress, displacement, natural frequency and other parameters on the boom fatigue life of the truck structure. Optimize the design, adopt new free fluid technology, and greatly reduce the impact of pump reversal on the boom. All the steel plates of the boom system are made of high-strength cold-aluminum steel plates, and the yield strength is more than 900Mpa, which ensures the high strength and light weight of the boom system. The boom system is equipped with 100% post-welding stress relief treatment for the distribution booms, legs, and fuel tanks. Each weld of the boom system undergoes 100% flawless inspection or X-ray photographs to eliminate all the defects, and the durability is much better. The rotary system of the boom system adopts the Germany or Italy products and the material is 42CrMo, which has higher strength and longer service life.

Features:

1. It adopts X type support legs, with short car body but high stability. The supporting legs can be unfolded in narrow spaces.

2. The valve is from Rexroth, Sunny or Eaton.

3. 900# steel plate from Austria, with three times strength than that of Mn16 steel.

4. Engine speed is controlled by IMS brand stepping motor and driver, which is imported from USA.

5. Large diameter cylinder, big pumping flow.

6. Fully hydraulic controlled commutation hydraulic system. Pumping, S-valve distribution to replace the reversing direction, no need electrical signals, and it has features of small reversing impact, low noise, greatly lengthen lifespan of the hydraulic pump and hydraulic valve, eliminating the middle segments of the electronic control signal, greatly improve the reliability of the entire set of equipment.

7. The unique boom cushioning technology greatly reduces the high pressure peak of the system. Even in the case of high output, the boom has small vibration and the tail pipe is stable.

Detail

Gallery

Parameters

Model 21m 25m 29m 33m 37m
Pumping System Max Theoretic Output (High/Low Pressure) (m3/h) 50/80 50/80 55/93 55/80 160
Max Theoretic Concrete Output (MPa) 13/7.5 13/7.5 13/7.5 13/7.5 8
Rated Working Pressure (MPa) 32 32 32 32 32
Pumping Frequency (High/Low Pressure) (min-1) 19/32 19/30 18/30 18/30 26
Hopper Capacity (L) 450 450 450 450 600
Feeding Height (mm) 1450 1450 1450 1450 1600
Hydraulic System Type Open loop Open loop Open loop Open loop Open loop
Distribution Valve S valve S valve S valve S valve S valve
Oil Cylinder Diameter x Stroke (mm) Φ100X1400 Φ100X1400 Φ100X1650 Φ100X1650/1400 Φ130X1900
Concrete Cylinder Diameter x Stroke (mm) Φ200x1400 Φ200x1400 Φ200x1650 Φ200X1650/1400 Φ260X1900
Hydraulic Oil Cooling Air cooling Air cooling Air cooling Air cooling Air cooling
Recommended Concrete Slump (mm) 120~230 120~230 120~230 120~230 120~230
Max. Aggregate Dimension (mm) 40 40 40 40 40
Placing Boom Structure Type 21-3R 25-4M 29-4M 33-4M 37X-4Z
Max. Placing Height (m) 21 25 29 33 37
Horizontal Distance (m) 17.5 21 24.6 33 34
Placing Depth (m) 7.5 14.4 17 22.4 21
Slewing Angle (°) 365 365 365 365 365
Pipe Diameter (mm) 125 125 125 125 125
End Hose Length (mm) 3000 3000 3000 3000 3000
Min. Height of Opening Placing Boom (mm) 8500 6410 10638 119000 8500
Outriggers Span (Front x Rear x Side) (mm) 4024x3100x5297 5510x4710x6194 6140x7098x6706 6140x7098x6706 6200x7200x8120
Chassis and the Whole Machine Chassis Model SSF1150HJP88 EQ5160THB EQ5196GLJ ZZ5207N5617D1 ZZ5307N4647C
Wheel Base 4600 5200 5700 5600 4600+1350, 4575+1400
Engine Type   YC6J180-46 ISDE270-40 D10.34-40 WD615.95
Engine Power (kw) 105 132 198 249 247
Oil Tank Cubage (L) 400 400 400 400 400
Tail Gas Exhaust Standard China IV China IV China IV China IV China IV
Overall Dimensions (mm) 9454x2180x3702 9800x2480x3535 10380x2495x3648 10750x2480x3648 12000x2490x3850
Others Lubrication Mode Automatic lubrication Automatic lubrication Automatic lubrication Automatic lubrication Automatic lubrication
Oil Tank Volume (L) 600 600 500 500 600
Control Mode Manual + remote control Manual + remote control Manual + remote control Manual + remote control Manual + remote control
Maximum Water Pressure (Mpa) 0.7 0.8 0.8 0.8 0.7
Water Tank Volume (L) 500 500 500 500 500
Pipe Cleaning Mode Water cleaning/dry cleaning Water cleaning/dry cleaning Water cleaning/dry cleaning Water cleaning/dry cleaning Water cleaning/dry cleaning
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input

Latest News

On April 27, 2022, DASWELL finished the test run of the 19m pumpcrete and delivered it to the port. It will be loaded into a 40FR at the port and then shipped to our Southeast Asia customer.

On April 18, 2022, DASWELL delivered one unit of 19m truck mounted concrete boom pump to Qingdao port. It will be loaded into a 40FR and will be shipped to Southeast Asia very soon.

On April 15, 2022, DASWELL loaded one set of diesel concrete mixer with pump, 100m pipe, 15 units of bar cutter and 15 units of bar bender into a 40HQ container in the port. It will be shipped to Southeast Asia very soon.

On March 9, 2022, DASWELL loaded 3 units of CPD40 diesel concrete pump and 1 unit of CPD60 diesel concrete pump and 400m steel pipe into 2*40HQ container at the port. It will be shipped to Southeast Asia very soon.

On January 14, 2021, DASWELL loaded 1 set of CPD80-16-176 diesel concrete pump, 150m pipe, 2 units of steel bar cutter, 3 units of steel bar bender, 2 units of concrete cutter, 2 units of power trowel, 2 units of plate compactor and 2 units of tamping rammer into a 40HQ container at Shanghai port. It will be shipped to Southeast Asia very soon.

On December 17, 2021, DASWELL sent 2 units of CPD40-10-85 diesel concrete pump and 200m pipe to Shanghai port and loaded them into 40HQ container on December 20 at Shanghai port. It will be shipped to Southeast Asia very soon.

On September 28, 2021, DASWELL loaded two sets of CPD40-10-85RS diesel concrete pump into a 40HQ container at the port successfully. On October 2, it will be shipped to Southeast Asia.

On August 18, 2021, DASWELL delivered 5 units of 30m truck mounted concrete boom pump to Qingdao port. The 5 units of 30m truck mounted concrete boom pump was loaded into 5*40FR at the port. They will be shipped to Southeast Asia on August 30.

On July 17, 2021, DASWELL delivered 1 set of CPD40 diesel concrete pump and 1 set of DHBT50 diesel concrete mixer with pump, 200m steel pipe and some rollers to the port. It will be shipped to Southeast Asia on July 24.

On June 12, 2021, DASWELL delivered one set of DHBT50 diesel concrete mixer with pump, 100m pipes, two sets of silotop dust collectors to the port. It was loaded into a 40HQ container at the port on June 13 and will be shipped to Southeast on June 17.

On May 20, 2021, DASWELL sent one set of CPD40 diesel concrete pump together with 100m pipe and one set of DHBT50 diesel concrete mixer with pump together with 100m pipe to the sea port and will ship it to Southeast Asia on May 27.

On January 20, 2021, DASWELL loaded one set of CPD60-13-130RS diesel concrete pump, one set of DHBT50 diesel concrete mixer with pump, 300m pipes and some spare parts into a 40HQ container and will ship it to Southeast Asia on this coming Saturday.

On November 23, 2020, DASWELL sent one CPD40 concrete pump, one impeller sand washer and 100m pipes to Southeast Asia successfully.

On September 2, 2020, DASWELL delivered one set of CPD40-08-62RS diesel concrete pump and 100m pipe to Southeast Asia.

On August 10th, 2020, Daswell delivered one set of CPD60 diesel concrete pump and 100m pump pipe to Southeast Asia.

On Oct 16, 2019, DASWELL loaded 2 units of ZL938 wheel loader into a 40HQ container and will ship it to Southeast Asia.

On June 10, 2019, DASWELL shipped 4 sets of 8m3 transit mixer, 1 set of 37m truck mounted pumpcrete and one set of 5ton wheel loader to Southeast Asia successfully.

On 2018-12-05, we delivered one set of mortar spraying machine to Middle East.

DASWELL delivered two units of 21m pumpcrete to the port on Sept 20, 2018. 

concrete mixer pump

On August 4, 2018, one set of diesel engine concrete mixer pump was shipped to South Asia.

Contact Us

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Whatsapp: +8615890602627

Tel: +86-371-55186675

Fax: +86-371-55186676

No. 2 CBD, Zhengdong New District, Zhengzhou City, Henan Province, China

© 2022 Henan Daswell Machinery Co., Ltd Sitemap

豫ICP备19026268号